|
|
| |
Wheeler Engineering FAT (Firearm Accurizing Torque) Torque Wrench Screwdriver |
| |
The Wheeler Engineering FAT Wrench is a hand driven, click/clutch style torque wrench that is very useful for applying the necessary torque to most firearm and firearm accessory fasteners. The FAT Wrench features a thick ergonomic handle, a standard ¼" drive tip, and can be used to apply torque from 10 to 65 in-lbs at 5 in-lb increments. Common uses include, but are not limited to: installation of scope ring and base screws, action screws and trigger guard screws. With proper care and use, the FAT Wrench will provide a lifetime of reliable service. Includes 9 bits and a square drive adapter.
Includes the following bits:
Leupold/Buehler windage bit
#10 flat blade bit
#11 flat blade bit
#32 flat blade bit
3/32" Allen bit
5/32" Allen bit
T10 Torx bit
T15 Torx bit
T20 Torx bit
Square drive adapter bit
|
|
